G-4225HA

High Precision Automatic Lathe

G-4225HA

  • catalog

    Description

    GE FONG’s G4225HA is a cost-effective machine for your production work. It is designed for production of parts for bath / sanitary, automobile and air / hydraulic industries.

    Machine specification

    ITEM G-4225HA UNIT
    Spindle speed 435-2250 rpm
    Camshaft Motor & Speed 1HP & 1-10rpm stepless rpm
    OD tool rest Nos. 5 pcs
    ID tool rest Nos. 2 pcs
    Max. processing dia. Ø42 mm
    Max.processing length-Slide stravel 60 mm
    Max. drilling dia. 25 mm
    Max. drilling depth 70 mm
    Max. tapping dia. M30 x P1.5 mm
    Max. turned taper-Slide taper 10° single side mm
    Spindle speed steps 6 steps
    Cam shaft speed steps RPM Stepless steps
    Spindle motor 5HP(4P) / 2.5HP(8P) HP
    Coolant pump motor 1 / 4 HP
    Coolant tank 80 L
    Hydraulic Oil tank 70 L
    Spindle center height 1150 - 1200 mm
    Weight 1500 KG
    Lathe size 1900*950*1700 mm

    Standard Accessories

    ITEM UNIT
    Die holder SET
    Cam blank SET
    Tool box & Adjust tool SET
    Lighting equipement SET
    Coolant splash guard SET
    Coolant sys. SET
    Hydraulic sys. SET
    Bar end sensor SET
    Manually loaded single bar feeder (With sliencer) SET

    Optional Accessories

    ITEM UNIT
    Threading attachment SET
    Automatic bar feeder SET

    *All specification are subject to change without notice in advance

  • GE FONG・s G4225HA is a cost-effective machine for your production work. It is designed for production of parts for bath / sanitary, automobile and air / hydraulic industries.

     

    • SPINDLE AND TOOL ADJUSTMENT
      • The spindle is precision manufactured from special steel, hardened and precision ground. Each tool rest is equipped with a micrometric screw, providing accurate adjustment for processing.
    • 2-POSITION ID TOOL REST
      • Tool change is automatic and rapid. Tapping is done through direction change of spindle motor rotation.
    • BAR STOPPER ARM
      • For barstock protruding length control and center drill mounting. Easy to adjust.
    • CAM AND CAM SHAFT
      • Plate cams (for diameter cutting control) and tube cams (for length cutting control) can be mounted on 2 separate cam shafts. Cam exchange is easy and cam shaft can be switched over to the :HAND OPERATED; side, convenient for trial cutting.
    • AUTO. FREQUENT LUBRICATION
    • CHIP TANK LARGE AND EASY TO CLEAN
    G-4225HA
  • G-4225HA
    G-4225HA
    G-4225HA